Install Google Chrome on Fedora 18

-
The recommended way to install Google Chrome is to navigate to the Google Chrome site at https://www.google.com/chrome, the site will automatically detect your operating system and display the appropriate download for you.

Download Google Software Package Public Signing Key (Important!)

Before you proceed to install Chrome, you need to download and import the public signing key from Google. You can skip this step if you have done this before while installing other Google products. Use the following command:

wget https://dl-ssl.google.com/linux/linux_signing_key.pub
sudo rpm --import linux_signing_key.pub


Please note that you only need to download the public key only once for all Google products in Linux.

Installing Google Chrome 

Then, you visit the site https://www.google.com/chrome. The site will detect you operating system and display the appropriate download page as below.



Click "Download Chrome"


Select "64-bit .rpm (For Fedora/openSUSE)". Click "Agree and Install".



If you are using Firefox browser, it will display a box as above. Select "Open with Software Install" and Click "OK".


Click "Install". You need to enter your password to authentication.

Depending of which software you have installed previously. You may received an additional box that inform you to install additional dependencies software. Install any dependencies software as per recommendation.



Click "Continue" to complete the installation. The installation will complete after a while. To confirm, Google Chrome is located under Show Applications >> Internet.

Error

If you received the following error, you have not downloaded Google's public key yet. Please following the instruction above.





*** End ***

Comments

Post a Comment

Popular posts from this blog

Revive Old Mac Mini (2009) with Linux

-
Image
We have an old Mac Mini (late 2009 version) lying around. The latest Mac OS X it could support was Mac OS X El Capitan. The machine is still good although the DVD drive does not worked anymore.  Apple will drop security update for El Capitan very soon. Running OS X El Capitan without any security update is not an option.  Instead of disposing a good piece of hardware, we can install Linux. However, before we start playing around with the Linux installation, we need to take stock of the hardware capability. We might need to upgrade some hardware so that we can run Linux smoothly. Mac Mini 2009 Specification This Mac has Core 2 Duo CPU (P8700) running at 2.53GHz. It support PC3-8500 DDR3 RAM running at 1066MHz. This Mac Mini has a Nvidia Geforce 9400M video card. It support 2 display output. Wifi specification is 802.11a/b/g/n. This is pretty high end at the time.  However, this WiFi uses Broadcom chipset (BCM4321), which is not very well supported in Linux since it
Read more

Configure Unattended Upgrades on Raspberry Pi

-
If we were to run Raspberry Pi headless (without attached monitor), it would be nice if we can perform unattended system upgrades. In Debain/Ubuntu class of software, we can perform unattended upgrades using the software package unattended-upgrades.  To install the software, use the command below:  sudo apt-get install unattended-upgrades # Following are additional software required # we only need mailutils or bsd-mailx, choose 1 sudo apt-get install mailutils sudo apt-get install bsd-mailx sudo apt-get install update-notifier-common Next, we need to edit the configuration files: sudo nano /etc/apt/apt.conf.d/50unattended-upgrades The configuration should be similar as below: Unattended-Upgrade::Origins-Pattern { // Codename based matching: // This will follow the migration of a release through different // archives (e.g. from testing to stable and later oldstable). // "o=Debian,n=jessie"; // "o=Debian,n=jessie-update
Read more

Install and Configure RealVNC in Linux Ubuntu 18.04 LTS

-
Image
RealVNC is a commercial company that sell VNC license for the enterprise market. However, the company allow home user to setup VNC server for personal use. The limitation is that you are only allow 5 connection. User must register an ID with the company. The configuration of your VNC will be stored on the company's server. Since RealVNC is professionally produce, it is much better compare to the open source product in Linux. The main advantage is easy configuration although there are steps to install and start the server especially on Linux platform. We do not need to worry about ip address and port number. What the server and client required is our RealVNC ID which we have created. Unlike the default Vino server that comes with Ubuntu, RealVNC will start without user login. The system is created with security in mind. Encryption is done transparently without any intervention from user. We will be showing a simple guide on how to install and Configure RealVNC Connect (serv
Read more